Microwave sensors, just like radar, launch wireless microwave will interfere with the microwave signal when the object moves into the range of LED lamp microwave sensors, the sensor detects a signal light, 30 seconds to leave or stationary when the object after when the micro-light standby. This lamp does not require a lens, sensing angle of 360 degrees, high sensitivity, reliability, widely used in all types of residential, summer, shopping malls, garage, underground parking lots, washing room, basement, corridors, warehouse, passageway, elevator, bus stop and other all-day or 24hours long time continuous lighting areas, a field of LED lighting and high-tech energy-saving applications in the field of automatic control, precision instruments, LED microwave sensors to run very stable, compare with the IR & PIR sensors are much more advanced.eg a piece of paper can be separated from the IR&PIR sensor, the microwave radar sensor sensing range, the wall thickness of less than 10 cm wall induction. In particular, full built-in, outside of what could not see, beautiful and beautiful and convenient.
1) Automatic Metering: according to ambient light and dark to select standby brightness sensor lights (full bright lights can be automatically sensing person or vehicle to the left of the people and vehicles in accordance with the set time to return to 10% in bright lighting because underground garage, a little micro-bright lighting, it will not appear gloomy terrible.) lit the lamp than the 100% power saving over 90%.
2) User-friendly design: easy installation, using more advanced object mobile microwave detection sensor technology, unlike the common voice, touch, buttons, etc., with high sensitivity, anti-interference, silent, fast response, the induction distance characteristics. Itself is not issued any type of radiation, the device power consumption is very small, non-contact, to the maximum to protect the health of people, away from germs accidental infection.
3) Energy saving, long life: the ultra-low power consumption, long standby, super sensitivity: high brightness LED life of up to 50,000 hours, effectively put an end to the long open load, to achieve energy savings, extended load life purpose. Reasonable structure design, cleverly hidden fixed, look no screws.
4) Temperature compensation: a unique temperature compensation chip, to reduce the LED sensing distance is affected by temperature. (Note: The sensor will be subject to the interference of the external magnetic field: transmit a wireless signal devices such as mobile phones, computers, etc., may affect the induction Note that).
5) Sensing distance and lamp mounting height, linear induction distance of 8 meters to 10 meters, laboratory testing, installed in a two-meter-high place, the lamp for the center, around 2 to 2.5 m sensing range, installed in a 3-meter place to lamp as the center, were around before and after the sensing distance of 3-4 meters.
1. Power: 24W
2. LED Type: SMD 2835
3. Lumen: 2000 ± 50Lm
4. Dimension: Ф26*1200mm
5. Voltage: AC85-265V
6. Induction Distance: 9m ~ 10m
7. Induction Angle: 360°
8. Lighting Time Delay: 35 seconds
9. Color Temperature: 2700k-7200k
10. Lamp Holder: T8, G13
11. Power Factor: PF≥0.9
12. Power Conversion Efficiency: ≥85%
13. Cover Material: Aluminum, PC cover
14. Surface Color: Milk white
15. PCB Circuit Board Material: Aluminum base
16. Operating Temperature: -20℃~+40℃
17. Storage Temperature: -30℃~+50℃
18. Storage Humidity: 10%-90%RH
19. Warranty Period: 3 Years